Posts

Touring Ranger

/0 Comments/in /by

The Ford Ranger is without a doubt, one of the most comfortable and capable touring rigs in the dual cab ute sector at the moment. It’s ability to be modified exceeds most of it’s competitors, it has plenty of power and mod-cons to make touring and off-roading a breeze and it looks the goods as well.

It was always going to be the perfect platform for this customer’s build and a good start to improve the Ranger’s capability, and to ensure the vehicle handled the extra weight, was to fit a Lovells GVM upgraded suspension package. The Lovells kit uses an upgraded mono-tube shock design as well as heavy duty springs to legally raise the GVM from the Ranger’s standard figures of 3200kg to 3500kg and gives the vehicle approximately 50mm of lift.

This upgrade perfectly complimented the tray and canopy package by Mits Alloy and got the vehicle sitting the way it’s supposed to. The jack-off design by Mits contains all the goodies for touring including tapered underbody toolboxes, trundle draw, spare wheel carrier, jerry carrier, roof racks and the canopy doors were colour coded to suit the rest of the vehicle.

Bar work is by TJM with the T13 Outback which has massive 63mm tubing and matching TJM brush bars and side steps, offering the ultimate in frontal protection. The bar also houses a TJM 9,500lbs Torq winch with synthetic rope and wireless control for recovery duties, and a set of TJM 215 LED driving lights turn night into day on those night time stints on the tracks.

A TJM Airtec snorkel was fitted to the vehicle to feed clean cool air and a Rhino Pioneer Platform was mounted to the roof featuring the backbone mounting system for extra storage and a base for the solar panel. A GME XRS Connect UHF and AE4705 antenna were fitted for communications and towing duties are taken care of by a Haymen Reese X-Bar.

 

Keep an eye for this awesome touring Ranger around the traps – it’s definitely got the goods going on and the perfect touring set-up!

Next Level 79 Series LandCruiser

/0 Comments/in /by

We just keep going bigger, and just when you think you can’t get any bigger – along comes this next level 79 Series LandCruiser build! It really is the next level here for us, being the first portal axle conversion on a 79 that we’ve done. The results speak for themselves – the portals really make it stand out from anything we’ve built before, but the overall build is a work of art and the customer couldn’t be happier with his dream build being completed.

For those not familiar with the portal axle, the conversion involves mounting a small gear set to the end of each axle tube to transfer final drive from the original axle position to a lower axle position. Effectively this raises the diff height without altering the suspension. Yes, that’s right – we are talking a total of 6” of true lift without altering the suspension!

The kit is a feat of engineering genius, designed and manufactured by Marks Adapters and has a whole heap of other benefits other than just lifting the vehicle. The rear track is also corrected and in addition, the overall track is widened by 80mm adding to vehicle stability and improving axle articulation.

The kit is engineered to a GVM increase of up to 3950kg for the 79 and can be engineered with 35” tyres. The portals themselves have a reduction of 16% between the cogs meaning that on 35” tyres the standard gearing is retained, so no more of those laggy take-offs from the lights after the big rubber is fitted.

The kit also comes with a slotted rotor brake upgrade to ensure that the big beast can pull up with the higher GVM loading.

No change to the original suspension geometry, means panhard rods and control arms stay flat reducing bump steer and with shorter coils you get less body roll, superior stability and better overall handling than a 6” suspension lift can offer.

The extra unsprung weight of the portals, bigger tyres and higher loading capacity means that heavy duty springs and shocks are still a must and on this build the OEM gear was traded for a combination of TJM Pace & XGS gear to get the big Merlot chariot handling its best. Remote res shocks and 600kg load springs take care of the added weight and improved handling.

Of course, there’s much more to this build than just the undercarriage. The other big mod that was performed to get even more out of the tried and trusted 79 Series LandCruiser platform was a 300mm chassis extension. This has improved weight displacement over the rear axle, further improving stability and handling with a heavy load.

Another big-ticket item is the Mits Alloy tray and canopy package. Mits Alloy have designed a tray and canopy package to suit the extended chassis of the 79 Series LandCruiser and this one is finished off with an Enerdrive lithium fit-out, Clearview drop-down fridge slide and Dometic CFX 75 Dual Zone fridge. The canopy package also includes the usual suspects such as built-in water tanks in the headboard, jerry and wheel carrier, trundle draw and tapered toolboxes.

Barwork is by Offroad Animal and includes the Toro front bar and rock sliders for sill protection. The front bar houses a Carbon 12k winch with synthetic rope and a set of Stedi Type X Pro driving lights. The extra track width called for some wide flares and a custom front set were supplied by Mick Tighe 4×4 and colour coded to match the rich Merlot red bodywork.

A Patrol Docta stainless steel snorkel and airbox combo supplies clean air to the intake and a Torqit 3.5” stainless steel exhaust is fitted from the DPF back for better exhaust flow. Other mods under the bonnet include a Diesel Care secondary fuel filter and HPD billet alloy catch can. An NPC 1300Nm clutch was fitted and touring range is now also improved with a 180L long range replacement tank by Long Range Automotive.

A Rhino Pioneer platform with the new Backbone mounting system was fitted to the roof for extra storage and a mounting point for the 180w Enerdrive solar panel. There’ also a Darche 270 awning for protection against the elements at the campsites. There’s enough lighting mounted to the platform to give off 360 degrees of light including two Stedi 13.4” micro light bars.

Interior mods include a Department of the Interior centre and rear side consoles as well as a full set of Black Duck 4 Elements seat covers. Windows were tinted and a set of OCAM weather shields fitted. A TJM Heavy Duty Compressor was fitted behind the rear seat for tyre inflation and also for engaging the free-wheeling hubs.

A Marks Adapters high clearance tow bar improves departure angles and a set of Clearview Next Gen towing mirrors also aid in the towing department. The big beast is rolling on CSA Hawk wheels that are a 17x 9 with a +40 offset and wrapped in Mickey Thompson ATZ P3 all terrain tyres which measure in at 315/70/17.

It’s definitely the next level when it comes to Cruiser builds and our customer could not be happier with his dream build. Can we top this one? It’s a big machine so it’s going to be hard to beat!

One Unstoppable 79 Series LandCruiser

/0 Comments/in /by

Ok, so we might be flogging the 79 Series LandCruiser just a tad, but there’s a pretty good reason for that. We can’t think of a more popular 4WD at the moment and when it comes to touring – there just isn’t anything quite as capable.

Truck-like capabilities, with the flexibility to be set up as a comfortable tourer that can still do the hard stuff when you need to.  Reliability, durability, old school live axles, lots of after-market mods available, a motor that will happily lug an overweight 4WD and caravan around all day – have we missed anything?

Yes, they’re on the pricey side and yes, in standard form they lack a lot of features, but with the right mods and set up, there is nothing available on the market today that will match one. And this big white beast is the panicle of what you can actually do to a 79 Series and there has certainly been no expense spared.

The foundation for this build is the Jmacx 300mm chassis extension and coil conversion, running the Kings 2.5 suspension with remote reservoirs. This ups the GVM on the 79 Series from 3300kg to a whopping 4495kg and the towing capacity is also up 500kg to 4t. Ride refinement and axle articulation is increased from the coils with those big remote-res shocks and airbags in the rear also aiding with towing and soaking up the corrugations on those rough stretches.

Another stand-out feature and the epicentre of its touring capability is the Mits Alloy tray and canopy package. Mits Alloy have designed a tray and jack-off canopy specifically to suit the stretched chassis of the 79 Series and this particular unit features two Engle 95L upright fridges, a 130L under-body water tank, trundle draw and the whole canopy is centrally locked.

Power will never be an issue with a Kick Ass 170A/hr slimline AGM battery managed by a TJM 25A DC-DC battery charger mounted behind the back seat, which believe it or not, is actually just a back-up for the giant Enerdrive 200A/hr lithium battery managed by the Enerdrive 40A AC and DC board with Simarine panel mounted inside the canopy. There’s also solar input thanks to a 180w Enerdrive panel for when the big beast is off the grid. This set-up powers a 2000w Enerdrive inverter and all the 12v power you could ever need while out on the tracks.

Vehicle protection is compliments of a colour coded TJM T13 Outback bull bar, TJM brush rails and side steps which have the big, chunky 63mm tubing to make this 79 Series just a little more bulletproof.

Lighting is an all-Stedi affair with a set of Type-X Pro driving lights up-front and a Stedi 50” double row light bar mounted to the Rhino Pioneer Platform. There’s also two side mounted Stedi micro 13.4” light bars for lighting up the campsite.

Recovering Patrols is handled by a Carbon 12,000lbs winch with synthetic rope mounted in the TJM bar, fitted with a Factor 55 Flatlink shackle as well as a rear mounted Carbon 12,000lbs winch with Factor 55 Prolink shackle which has the cradle integrated onto the Jmacx chassis. There’s an ARB twin compressor and 3L air tank controlled by an Airbag Man air control kit which takes care of tyre inflation as well as supply to the airbags, all mounted in one of the rear toolboxes.

Performance modifications include a Safari Armax snorkel which feeds fresh air onto a Patrol Docta stainless steel airbox. The intercooler was upgraded to a HPD S2 top mount unit to keep that air flow nice and cool. The big hefty beast needed a serious kick in the pants after all the weight gain and was sent off to Streamline Automotive at Beresfield for an ECU tune. The guys up there where happy to wring a big torque increase of over 70% out of the lazy VDJ V8 and still retain reliability. The power is dialled up a whole lot quicker with fitment of an iDrive unit for extra throttle response and drivability. A Torqit 3.5” stainless steel exhaust designed especially for the Jmacx exhaust routing was also fitted from the DPF back for better exhaust flow.

Engine protection is courtesy of a Diesel Care secondary fuel filter and HPD billet alloy catch can. A clutch upgrade was also a necessity and the NPC 1300nm upgrade kit is now part and parcel of the Jmacx kit. As is stopping power and the big GVM kits also include an upgraded hydraulic brake booster. A Harrop diff breather kit to both diffs, transmission and transfer case prevent water ingress to vitals as well.

Interior mods started with the whole inside being stripped out and Dynamat Xtreme sound insulation fitted. The factory front seats were ditched for the sexy looking Recaro buckets and the rear bench received a leather retrim to match the fronts. Not only to the Recaros look a million dollars, but the added bolstering and lumber support means you can spend more time in the saddle on those long touring trips.

Department of the Interior centre console and rear seat side consoles were fitted, as well as Cruiser Consoles overhead console with touch lighting.

 

Communications are handled by a GME XRS370C UHF radio running a GME AW4705B antenna, and a Cel-Fi mobile phone repeater with GME AT4705B antenna.

The factory audio system was swapped out for an Alpine touch screen unit with Hema maps built in and a speaker upgrade to DB Drive units gives much better sound clarity and boost than the OEM speakers ever could.

Other touring mods include a Brown Davis 180L long range tank which has been designed specifically for the unique requirements of the Jmacx rear end, a Darche Hi-view 1600 rooftop tent,  270 Eclipse awning on the passenger side and Eclipse 2 x 2.5m side awning on the driver’s side. Roof mounted Maxtrax and shovel holders are mounted to the Rhino Pioneer platform and the whole package is rolling on a set of Method 305 NV HD machined face wheels wrapped in BF Goodrich KM3 tyres which measure in at 315/70 R17.

When it comes to any type of terrain and any long-distance touring, there certainly is no stopping this big 79 Series LandCruiser. It’s a testament to what you can actually do with these things and the capability is far beyond anything else on the market. Keep an eye out for this one around the traps – you certainly can’t miss it!

 

 

79s in the Blood

/0 Comments/in /by

The love of LandCruisers can often be hereditary and the passion for owning a heavily modified 79 certainly runs strong in this family. Father David and son Nick have a common family interest in 4WDing and touring and their passion extends to the love of the Dual Cab 79 Series LandCruisers, so it make sense to do a father/son build from start to finish on a couple of big double cabs.

David opted for the traditional and much loved Sandy Taupe while Nick decided to go left-field and order in a brand spanking new Merlot Red 79.  The only thing better than a Jmacx coil conversion is having two on the go at the same time and, well a 79 build just isn’t complete without one these days so it makes sense to have both of these beasts as capable as you can get a 79.

Both vehicles were fitted with the coil spring conversion using Kings remote res shocks giving a GVM of 4200kg at 4 inches of lift. Both kits entail the usual suspects including refabbed diff housing correcting rear wheel track, stronger axles, airbags for load carrying assistance, front heavy duty radius arms, adjustable panhard rods and an NPC heavy duty clutch.

Both vehicles were also fitted with Method 312 Matte Black wheels in a 17×9 inch wrapped in the Toyo Open Country RTs that measure in a 35 x 12.5 inches. From here though, the vehicles start to take on their own personal touches and the biggest point of difference between the two starts with the bar work. While David went with the traditional bar in the way of the TJM T13 Outback bar offering full frontal protection of the big 79’s square lines, and matching TJM brush bars and side steps – Nick opted for a more stylised look while still offering basic protection from the Predator Bar by Offroad Animal along with matching rock sliders. Both vehicles will be recovering Patrols using a 12,000lbs TJM Torq winch with synthetic rope and wireless controllers.

The other stand-out features for both of these vehicles include tray and canopy packages from MITS Alloy. Again, personalised touches included dimensions of the canopies with David going with the full-length canopy and Nick opting for a half canopy, both colour- coded to match the vehicle.  David’s full-length canopy has the complete touring fit-out consisting of a Bushmans upright 85L fridge, sliding draws, Travel Buddy oven and a battery system combining Enerdrive AC and DC charging systems and twin Kick Ass 170 A/h AGM batteries. There are twin wheel carriers mounted to the back.

There is a full on-board air inflation kit by Airbag Man using the TJM Heavy Duty Compressor. This gives David full control of the airbags in-cab as well as being able to run an airline for tyre inflation which is flush mounted into the rear fascia of the tray. Tapered colour coded tool boxes and an under tray trundle draw add to storage capacity and a built-in water tank in the headboard saves room for water storage for remote travel supplies.

Nick’s Canopy is fitted out with a Clearview ES150 Plus drop-down fridge slide and Enerdrive BCDC charging system driving a single 170A/h kickAss slimline AGM battery.  A Travel Buddy 12V oven was also mounted on an overhanging shelf compartment.  Again an Airbag Man on-board Air inflation system was installed using the TJM Heavy Duty Compressor for airbag inflation as well as the ability for tyre inflation. Tapered under body tool boxes and a trundle tray were also a must for Nick for extra storage capacity.

Both vehicles are fitted with Hayman Reece’s top of the range X Bar tow bar which incorporates heavy duty tow points into the bar. Both vehicles are also fitted with the Redarc Tow Prow Elite Version 3 trailer braking units.

David’s 79 is running a Rhino Pioneer Platform on the roof which holds the Enerdrive 180W solar panel and Darche 180 Eclipse awning for protection from the elements.

Lighting for Nick’s vehicle is a 21.5″ slimline LED light bar by Stedi which is integrated into the top tube of the Off-Road Animal bar and lights up the track while being tucked away nicely and out of harm’s way. David runs the Stedi Type-X Sport 8.5″ LED driving lights which are perfect for turning night in to day.  Both have had the OEM headlights replace with Stedi LED upgrades so no more travelling by candle light as anyone that’s driven the 79 on standard headlights will be familiar with.

Under the bonnet, both of these trucks are running HPD catch cans, Diesel Care secondary fuel filters and HPD upgraded intercoolers for engine protection; and Patrol Docta stainless steel air boxes and snorkels for improved, cleaner air flow.  Both were fitted with the Marks Adapters bonnet strut upgrade to make life a little easier and save the old-school steel bonnet rod from bending under the weight of the hefty overweight bonnet.

Interior features for both vehicles include  upgraded entertainment systems by Kenwood, installed by our good friends at House of Soundz. The interiors were completely stripped out and Dynomat sound insulation fitted for reduced road noise and better interior acoustics. Bushmans Centre Console fridges were installed for keeping stuff cool while on the road and  Department of the Interior custom console with gauges and USB sockets were designed to fit the Bushmans fridges.  GME XRS 370 UHF radios take care of comms and a set of Black Duck 4 Elements seat covers finishes the interiors off just nicely on these two beasts.

The pair of big 70s will definitely be the talking point of many a family get-togethers now and outings on the tracks are family affair. The guys couldn’t be happier with their big rigs and we are happy to be apart of this father/son build. Keep and eye out for these two weapons on the tracks, you certainly wont miss them!

 

 

 

 

 

Redi to Rumble

/0 Comments/in /by

Doing the big builds are what we’re all about here at Redi Cruisers and more often than not, it’s not just about what we do here but a collective effort by a number of companies working together to achieve the same end result for a customer. We’re all about collaborating with some of the best names in the business to piece together the right products and the right solutions to suit your requirements. The results always speak for themselves and this dual cab 79 is up there with the best of them!

Our customer Terry approached us with some unique requirements and a very particular criteria that he was expecting from his new 79. Firstly, it needed to have plenty of canopy space with the versatility of being able to move things around to suit his needs. Coming from a Patrol, Terry was used to the comfort and refinement of coils springs so for touring, a coil spring conversion was definitely on his list. After doing some research, there was also one last big-ticket item on Terry’s list that was a must have – an automatic transmission conversion.

We knew we had the coil conversion covered has we’ve been doing the Jmacx coil conversions for a few years now. Jmacx have designed and refined their conversion kits to perfection over the years and now, although it’s still quite an extensive process, our working relationship with these guys sees a flawless process in place that makes getting your coil conversion done an easier process than buying a new pair of shoes for the end customer!

This kit includes a GVM upgrade certification to 3900kg and is running 3″ of lift on the Kings 2.5 remote res shocks and air bags to assist in load carrying. We shoe-horned in a Brown Davis 180L long range fuel tank which has been designed by Brown Davis to suit the coil conversions. Exhaust is by Torqit which is a 3.5″ stainless steel, mandrel bent, DPF back system, custom made by Torqit to suit the unique routing requirements of the coil conversion. Torqit are another locally based company here in Newcastle that make awesome performance products.

Mits Alloy had us covered when it came time to putting together an alloy tray and canopy package that met Terry’s requirements for touring and, as always, the local Newcastle -based manufacturer came up trumps on this build with this amazing looking graphite lift-off design. It incorporates an under tray trundle draw, 35l poly water tank on the headboard, tapered tool boxes and built-in kitchen bench table.

The inside of the canopy is fitted with an Enerdrive DC and AC charging system using a 125A/h lithium battery which powers the Dometic CRX110 upright fridge and all the lighting throughout the canopy. There’s also an under-bonnet dual battery system running a Redarc BCDC charger on a custom bracket by Perth Performance Diesel powered by a Centruy Dual Force AGM battery which feeds power to the canopy system off the alternator and also works as a back-up to run canopy accessories. Hidden in one of the tapered tool boxes is a TJM HD air compressor to control airbag inflation and tyre inflation as well.

We enlisted the help of our good mates at All Four x 4 Spares for the auto conversion and after the coil kit was completed, we shipped the vehicle off to the boys over at Kotara for them to install the 6-speed Wholesale Automatics kit. The transmission is the same box used in the LC200 but using an upgraded torque converter, valve body and transmission cooler so the box is even stronger and more reliable than the standard item and is adapted to suit all the standard 70 series components and transfer case.

The difference in the way the big beast drives now is like chalk and cheese. Imagine the ride-refinement of coil springs and an auto cog swapper combined with the rugged build and durability of a bulletproof 79 dual cab ute. This is definitely the best of both worlds!

There is, of course, a lot more to this build as well. TJM bar work is the order of the day with the T13 Outback bull bar, TJM side steps and brush rails to suit. The bar work has all been colour coded Graphite and houses the TJM 12,000lbs winch with synthetic rope and there are a set of Stedi Type-X Pro LED driving lights for day-making.

There’s a Safari Armax snorkel feeding clean air into a Patrol Doctor stainless steel air box and there’s a HPD high-flow, top-mount intercooler helps keep air-flow nice and cool.

Further engine protection is helped with the fitment of a Diesel Care pre-filter on a custom-made bracket by Perth Performance Diesel which also houses the diff breather filters.

The interior was completely gutted and sound deadened using Dynomat before any mods were made.  Front and centre of the interior is an Alpine in-dash head unit with Hema maps installed, front and rear speaker pods, all fitted by House of Soundz at Broadmeadow. A Cruiser Consoles over-head console houses the GME UHF and extra storage. The centre console was fitted by the guys at All Four x 4 as part of the auto conversion and houses the display panel for transmission readings.

There’s a set of Clearview power-fold, electric towing mirrors for seeing around the canopy and a Rhino Pioneer platform up-top for extra storage. The big grey beast is rolling on a set of Pro Comp Series 74 Trilogy alloy wheels that measure in at 17 x 8” and a set of BF Goodrich KO2 All Terrain tyres that are a 285/70/17.

Building a 79 like this is like conducting a symphony of an awesome team of fitters, suppliers and accessory manufacturers to achieve the end result. Here at Redi Cruisers we are all about the customer being able to come to the one place to build their dream Cruiser. Terry is over the moon with his new 79 that is that perfect mix of refinement vs durability. Keep an eye out for his awesome rig out an about on the tracks.

Stretched 79

/0 Comments/in /by

It all started with something simple – a bare bones, plain-Jane white 79 Series Dual Cab -brand new, but looking a little on the sad side to be honest! I know – let’s chop it up and make it longer! That was the call from business owner Michael and the plans were set in place for our new shop 79 Series.

But it wasn’t as simple as that. I know we’ve said it before, but this thing turned in to the biggest build we’ve ever done…literally. The foundation of this Goliath 79 is the chassis built by Jmacx Engineering which has lengthened the wheelbase by 300mm, displacing the bulk of the loaded weight further forward of the rear axle, and making the big girl more stable on and off the road. There’s more than meets the eye with this seriously heavy duty chassis though, as it also incorporates the coil cradle to complete the coil spring conversion without the need for an additional bolt-in cradle. The beauty of this set-up is the ability to legally raise the maximum GVM to 4490kg and the towing capacity to 4t. With a lower tare weight than most yank trucks available here – this leaves the payload on the stretched 79 greater than anything else on our market.

With that in mind, we set about loading this thing up to tackle anything this country’s harshest conditions can throw at it. Michael had plans to not only build a 79 with the works, but something that met his needs for touring, work and everyday driving. The next stand-out feature is the custom built alloy tray and jack-off canopy built by Mits Alloy.

Mits Alloy are a company based locally to us, that had already been building awesome trays and canopies for some of our customers, so we got them involved in the build early on in the piece to come up with some with a solution to suit the modified chassis. The end result is capable of utilising three fridges including the custom Waeco CFX100 beer keg fridge complete with built in beer taps. Other additions include the Dometic 110L upright fridge and the Waeco CFX75L Dual Zone fridge on the Clearview ES220 Plus drop-down fridge slide. After all – you can never have too much room for beer….and food!

The fridges and all the lighting are powered by the Enerdrive 12v/240v management system running a 200Ah Enerdrive lithium battery all mounted in the canopy.  The system receives charge from the alternator via a TJM 25a DC/DC charger and Century Dualforce battery mounted under the bonnet, and there’s also solar input into the system for remote charging.

The DB Drive 36″ sound bar provides fat beats for the campsite and is controlled via Bluetooth through your phone and the canopy is finished off with Stedi work lights and LED strip lighting through-out.

There’s room in the under body lockers for the on-board air inflation kit by Airbag Man and it’s controlled via the TJM Connect accessories management system. This takes care of inflation of the air bag suspension on the fly and has flush mounted air fitting for running a hose to the tyres for inflation.

Piggy-backing the canopy is the Jmacx coil spring rear-end which uses a combination of Kings 2.5 remote res shocks and heavy duty coils with Airbag Man High Pressure airbags in the rear to assist in stabilising the load. The rear coils provide a much more refined ride, better axle articulation and the refabricated diff housing and upgraded axles provide added strength to make the rear-end bulletproof, even with the added weight. Can’t winch forward? The Jmacx chassis has its own rear mounted winch cradle which houses a TJM 12,000lbs Torq winch perfect for getting out of those tricky spots.

Power upgrades are curtesy of Streamline Automotive who preformed a remap on their dyno. This combined with a HPD upgraded intercooler, TJM Airtec snorkel and Patrol Doctor Air box have increased power by 42% and torque is up a massive 68% over the stock numbers. It’s more than enough to get the big girl up and sprinting off the mark. Exhaust gas is flowing hard and fast thanks to the Torqit 3.5 inch stainless steel system made specifically to suit the unique routing of the extended and coiled rear end of the Jmacx chassis. There’s a HPD catch can and Diesel Care Pre Filter system for better engine protection.

A heavy duty clutch is a necessary upgrade once you start adding weight, power and/or bigger wheels on the 79 and a requirement for the 4490kg GVM Upgrade. The clutch supplied with the kit is by NPC and they are our go-to supplier for clutch upgrades.

Barwork is all by TJM with the T13 Outback bar up front, brush rails and side steps, all running 63mm tubing. The bar houses a TJM 12,000lbs Torq Winch and a set of Stedi Type X Pros light up the night up- front. Giving a good spread of side lighting is two 11.5 inch Stedi light bars mounted under the headlights and two GME antennas take care of communications, with one for UHF and one as a phone booster.

A Rhino Pioneer roof platform is fitted with more lightwork from Stedi including a 41.5 inch slimline lightbar up-front and two side facing 11.5 inch slimline light bars to light up the campsite. A Rhino Sunseeker Awning is bolted to protect patrons from the elements whilst attending the beer keg fridge, and the platform also has a Rhino hi-lift jack and shovel holder for extra recovery gear storage.

The interior has received the once-over with over-head and centre consoles from Department of the Interior that house the TJM Connect control panel and a Uniden 9080 UHF radio. Seat covers are care of Black Duck and there’s a Kenwood in-dash entertainment system front and centre, running upgraded speakers and a slimline subwoofer behind the back seat. The whole interior has been soundproofed using Dyno Mat to reduce panel vibration while the stereo is cranking and to reduce road noise.


The whole package is rolling on ROH Maverick Alloy wheels measuring at 16x 8 inches and a set of 315/75 R16s by BF Goodrich which are a KM3 mud terrain tyre. If you’re in the market for an ultra-tough touring truck that has a payload unlike anything else on the market, then give us a call to find out what we can build for you. We’ve built this truck for a purpose and no matter what your purpose we can build one to suit your needs –  ready to tour, ready to work or just ready to hit all the hard tracks – Redi-built by Redi 4×4!